
Food safety regulations are constantly evolving.
When the European Union introduces a new maximum level for a contaminant, the change does not only affect legal documentation. It can also influence laboratory testing, supplier controls, product specifications and quality-management processes.
For food manufacturers, the important question is not only:
“What is the new limit?”
It is:
“What needs to change in our testing strategy because of it?”
A new contaminant limit can require companies to review whether their existing analytical methods, sampling plans and quality controls are still suitable.
Why contaminant limits change
Maximum levels for contaminants are usually updated when new scientific evidence, monitoring data or risk assessments become available.
The EU continuously evaluates contaminants in food and establishes maximum levels where necessary to protect consumers. Regulation (EU) 2023/915 sets maximum levels for certain contaminants in food and is regularly amended when new risks need to be addressed. [European Commission, Contaminants in food, https://food.ec.europa.eu/food-safety/chemical-safety/contaminants_en]
These changes can involve:
- introducing a new contaminant limit
- lowering an existing maximum level
- adding new food categories
- changing sampling requirements
- updating analytical criteria
For manufacturers, every regulatory change creates a practical question:
Does our current control strategy still demonstrate compliance?
A new limit does not automatically mean a new product problem
When a stricter contaminant limit is introduced, companies sometimes immediately assume that products will fail.
That is not necessarily the case.
A regulatory change can mean:
- the product already complies
- existing data are sufficient
- additional verification testing is needed
- the analytical method needs updating
- process controls need adjustment
The first step should always be a gap assessment.
Step 1: Identify which products are affected
The first question is:
Which products fall under the new requirement?
A contaminant limit usually does not apply equally to every food product.
The impact depends on:
- ingredients
- product category
- manufacturing process
- origin of raw materials
- consumer group
- intended use
For example, a contaminant linked to agricultural raw materials may be more relevant for plant-based products than for highly purified ingredients.
A product portfolio review helps identify where action is actually needed.
Step 2: Review existing testing data
Before ordering new analyses, review the information already available.
Check:
- historical laboratory results
- supplier certificates
- incoming-material testing
- finished-product testing
- previous risk assessments
- complaints or deviations
Historical data can answer important questions:
Have we measured this contaminant before?
Were results consistently below previous limits?
Which products show the highest variability?
A data review can prevent unnecessary testing while highlighting higher-risk products.
Step 3: Check whether the analytical method is still suitable
A new legal limit can change the requirements for laboratory testing.
Imagine the previous maximum level was:
10 mg/kg
and the new limit is:
1 mg/kg
The existing analytical method may no longer provide enough sensitivity.
The laboratory now needs to demonstrate that the method can reliably measure concentrations around the new requirement.
Important method characteristics include:
- detection limit
- quantification limit
- accuracy
- precision
- selectivity
- recovery
The analytical method must match the regulatory question.
A method that was acceptable before may not be sufficient after a limit change.
Step 4: Review sampling procedures
Testing quality depends not only on the laboratory method.
The sample itself is critical.
A food batch can be heterogeneous, especially when contaminants are unevenly distributed.
Therefore, manufacturers should review:
- sampling location
- sample size
- frequency
- batch selection
- storage conditions
- transport requirements
EU legislation defines specific sampling and analysis requirements for several contaminants to ensure reliable compliance decisions. [European Commission, Sampling and analysis of contaminants in food, https://food.ec.europa.eu/food-safety/chemical-safety/contaminants/sampling-and-analysis_en]
A perfect laboratory method cannot compensate for an unsuitable sample.
Step 5: Update product specifications
A regulatory change may require updates to internal specifications.
For example:
Previous internal limit:
≤ 8 mg/kg
New legal limit:
≤ 5 mg/kg
The internal specification may need to be reviewed.
Companies should consider whether their internal acceptance criteria:
- reflect current legislation
- provide sufficient safety margins
- match analytical capabilities
- support batch-release decisions
Specifications should not simply copy legal limits.
They should support effective quality control.
Step 6: Review suppliers and raw materials
Many contaminants enter the food chain through raw materials.
Therefore, a new limit may require additional supplier evaluation.
Review:
- raw-material origin
- agricultural practices
- supplier controls
- existing certificates
- previous contamination trends
- supplier testing frequency
For example, if a new contaminant limit affects a botanical ingredient, the risk assessment may need to focus on cultivation, harvesting and processing conditions.
Supplier documentation is valuable, but it should match the actual risk.
Step 7: Consider process changes
Not every contaminant can be controlled by selecting a different supplier.
Some contaminants are created or increased during manufacturing.
Examples include:
- process contaminants
- heat-induced compounds
- oxidation products
- degradation products
In these cases, manufacturers may need to review:
- temperature
- processing time
- storage conditions
- formulation
- packaging
A new limit can therefore become an R&D topic, not only a quality-control topic.
Step 8: Review your testing frequency
A new contaminant limit does not always mean every batch needs testing.
The appropriate frequency depends on:
- risk level
- product variability
- supplier history
- previous results
- regulatory expectations
A risk-based approach is usually more effective.
High-risk materials may require:
- increased testing frequency
- additional supplier controls
- more frequent verification
Low-risk materials with strong historical data may require less intensive monitoring.
Step 9: Check whether the change affects product claims
Contaminant regulations are usually focused on safety.
However, changes in testing can also affect product communication.
For example:
A company may advertise:
- “tested for purity”
- “premium quality”
- “carefully controlled ingredients”
These statements should match the actual quality system and available evidence.
Testing claims should always be supported by appropriate documentation.
Step 10: Update documentation
Regulatory changes should be reflected throughout the quality system.
Potential updates include:
- HACCP documentation
- risk assessments
- specifications
- supplier requirements
- laboratory instructions
- testing plans
- technical files
- quality agreements
A regulation change is not complete when the laboratory report exists.
It is complete when the whole quality system reflects the new requirement.
Example: A new heavy metal limit
Imagine the EU introduces a lower cadmium limit for a food category.
A manufacturer should ask:
Product impact
Which products contain ingredients where cadmium is relevant?
Supplier impact
Do raw-material suppliers provide updated data?
Testing impact
Can the laboratory measure the new limit reliably?
Specification impact
Do internal acceptance criteria need adjustment?
Process impact
Can manufacturing influence the final concentration?
Documentation impact
Have procedures been updated?
The legal change becomes a structured quality review.
Example: A new mycotoxin requirement
Mycotoxins demonstrate why risk-based testing matters.
A new limit may affect products containing:
- grains
- nuts
- spices
- plant-based ingredients
The manufacturer may need to review:
- supplier qualification
- storage conditions
- incoming controls
- finished-product testing
The solution is rarely just “test more”.
The better question is:
Where does the contamination risk enter the product chain?
Why companies often react too late
A common mistake is waiting until the enforcement date.
By then, manufacturers may need to:
- validate new methods
- qualify laboratories
- update specifications
- collect supplier data
- modify processes
These steps take time.
A proactive approach is much more efficient.
A practical workflow after a regulatory change
When the EU introduces a new contaminant limit:
1. Read the change
Identify exactly what has changed.
2. Map affected products
Determine which products and ingredients are relevant.
3. Review existing evidence
Check historical data and supplier information.
4. Assess testing gaps
Identify whether methods and sampling are sufficient.
5. Update controls
Modify specifications, testing plans and procedures.
6. Verify compliance
Generate new analytical evidence where needed.
7. Document decisions
Ensure the quality system reflects the change.
Common mistakes to avoid
Testing without understanding the requirement
A laboratory result is only useful when connected to the correct legal limit.
Using outdated analytical methods
A method suitable for an old limit may not be suitable for a new one.
Ignoring suppliers
Raw materials are often the first point where contamination risk enters.
Updating only the specification
A new limit can affect the entire quality system.
Waiting until enforcement
Preparation takes longer than simply ordering a test.
Why regulatory changes are also opportunities
A regulatory update can reveal weaknesses in existing processes.
Companies that review their systems early can often improve:
- supplier management
- product consistency
- testing efficiency
- documentation quality
- risk control
Regulatory compliance is not only about avoiding failure.
It can also strengthen the overall quality strategy.
The Makrolife perspective
At Makrolife, regulatory changes are approached as a connection between legislation, analytical testing and practical product decisions.
A new contaminant limit raises several questions:
- Which products are affected?
- Which tests are actually required?
- Is the analytical method suitable?
- Are supplier controls sufficient?
- Does the specification need updating?
- Is additional documentation needed?
Combining regulatory assessment with laboratory expertise helps companies respond efficiently instead of simply increasing testing without a clear strategy.
The bottom line
A new EU contaminant limit is not just a number in a regulation.
It can trigger changes across:
testing methods
sampling plans
supplier controls
product specifications
risk assessments
and quality documentation.
The most effective response is not to test everything.
It is to understand:
What changed?
Which products are affected?
What evidence is needed?
How can compliance be demonstrated?
That is how regulatory changes become manageable quality decisions instead of last-minute problems.